Petrel Reservoir Engineering step by step tutorial
Moderator: Simulation_team
Re: Petrel Reservoir Engineering step by step tutorial
WHERE IS THE ATTACHMENT ?
HOW CAN I DOWNLOAD THE MODEL AND THE TUTORIAL ?
Regards
HOW CAN I DOWNLOAD THE MODEL AND THE TUTORIAL ?
Regards
Re: Petrel Reservoir Engineering step by step tutorial
You can find the attachment in the first postlucasg wrote:WHERE IS THE ATTACHMENT ?
HOW CAN I DOWNLOAD THE MODEL AND THE TUTORIAL ?
Regards
-
- Posts: 2
- Joined: Mon Nov 06, 2017 2:41 pm
- LinkedIn Profile: https://www.linkedin.com/in/ali-shakouri-52505885/
-
- Posts: 5
- Joined: Thu Aug 31, 2017 3:42 am
- LinkedIn Profile: https://www.linkedin.com/
Re: Petrel Reservoir Engineering step by step tutorial
Hi, I was trying to open the data in petrel 2014, but I received a warning message:
Petrel is unable to match the legacy coordinate reference system (CRS)
"None, UTM zone 3E"
Select a CRS if you want to provide a geodetic reference for your project to make it spatially aware"
Which CRS i have to use (is ED50-UTM31 or GF:UK-UTM31-ED50BW..??? or it doesnt matter if I continue spatially unaware..??
Thank you for your help
Petrel is unable to match the legacy coordinate reference system (CRS)
"None, UTM zone 3E"
Select a CRS if you want to provide a geodetic reference for your project to make it spatially aware"
Which CRS i have to use (is ED50-UTM31 or GF:UK-UTM31-ED50BW..??? or it doesnt matter if I continue spatially unaware..??
Thank you for your help
Re: Petrel Reservoir Engineering step by step tutorial
i think the second option "continue spatially unaware"
-
- Posts: 1
- Joined: Fri Oct 05, 2018 6:07 pm
- LinkedIn Profile: https://www.linkedin.com/feed/?trk=
Re: Petrel Reservoir Engineering step by step tutorial
thanks a lot.
I want to ask here if any one can run the simulation from Petrel!
I have tried a lot to do so , but every time I got the same error which is: failed to export case.
I do use Petrel 2015 and eclipse 2010 cracked versions.
any one please can help me fixing this stupid problem.
thanks a lot in advanced.
I want to ask here if any one can run the simulation from Petrel!
I have tried a lot to do so , but every time I got the same error which is: failed to export case.
I do use Petrel 2015 and eclipse 2010 cracked versions.
any one please can help me fixing this stupid problem.
thanks a lot in advanced.
Re: Petrel Reservoir Engineering step by step tutorial
Check all of your input parameters. PVT, pressure, production....etcEyadBatal wrote:thanks a lot.
I want to ask here if any one can run the simulation from Petrel!
I have tried a lot to do so , but every time I got the same error which is: failed to export case.
I do use Petrel 2015 and eclipse 2010 cracked versions.
any one please can help me fixing this stupid problem.
thanks a lot in advanced.
for each section validate the inputs and it will show you the source of error.
-
- Posts: 1
- Joined: Sun Mar 03, 2019 4:20 pm
- LinkedIn Profile: https://www.linkedin.com/feed/
Re: Petrel Reservoir Engineering step by step tutorial
Thanks for putting in the time to make this material.
Really appreciate it!
Really appreciate it!
Re: Petrel Reservoir Engineering step by step tutorial
You are Most welcomeGeoGeek wrote:Thanks for putting in the time to make this material.
Really appreciate it!
Re: Petrel Reservoir Engineering step by step tutorial
Hi Everyone,
I am new to this forum. I would like to try out the Petrel tutorial. But I do not have access to petrel software at the moment. Is there a crack for the software available anywhere in this forum? I would like to install it and try out the tutorial. Thanks in anticipation of your reply.
I am new to this forum. I would like to try out the Petrel tutorial. But I do not have access to petrel software at the moment. Is there a crack for the software available anywhere in this forum? I would like to install it and try out the tutorial. Thanks in anticipation of your reply.
-
- Posts: 3
- Joined: Wed Apr 10, 2024 6:41 pm
- LinkedIn Profile: Moe Thu
Re: Petrel Reservoir Engineering step by step tutorial
Thanks a lot for the sharing the materials and tutorial.
-
- Posts: 3
- Joined: Wed Apr 10, 2024 6:41 pm
- LinkedIn Profile: Moe Thu
Re: Petrel Reservoir Engineering step by step tutorial
Hi
Happy for being a participant to the forum.
I have faced obstacles while I am defining the multiple oil-water contacts with different faulting systems. These two contacts are in the different depths such as - 1,200 m for one contact and 2,000 m for the other.
How can I do it for these two contacts? Thanks for your kind support.
Happy for being a participant to the forum.
I have faced obstacles while I am defining the multiple oil-water contacts with different faulting systems. These two contacts are in the different depths such as - 1,200 m for one contact and 2,000 m for the other.
How can I do it for these two contacts? Thanks for your kind support.
Re: Petrel Reservoir Engineering step by step tutorial
different OWC is available only in two separate compatrments with clear barrier
-
- Posts: 3
- Joined: Wed Apr 10, 2024 6:41 pm
- LinkedIn Profile: Moe Thu
Re: Petrel Reservoir Engineering step by step tutorial
Thanks for your suggestions and kindness. I will try on it.
Re: Petrel Reservoir Engineering step by step tutorial
Hello,
I would like to know how to do upscaling of grids in petrel
I would like to know how to do upscaling of grids in petrel