The Production of Isopropyl

Post Reply
hanlin
Senior member
Posts: 100
Joined: Fri Apr 15, 2011 2:44 pm

The Production of Isopropyl

Post by hanlin »

Isopropyl alcohol is produced by combining water and propene.There are two processes for achieving this: indirect hydration via the sulfuric acid process, and direct hydration. The former process, which can use low-quality propene, predominates in the USA while the latter process, which requires high-purity propene, is more commonly used in Europe. These processes give predominantly isopropyl alcohol rather than 1-propanol because the addition of water or sulfuric acid to propene follows Markovnikov's rule.
The indirect process reacts propene with sulfuric acid to form a mixture of sulfate esters. Subsequent hydrolysis of these esters produces isopropylalcohol. Direct hydration reacts propene and water, either in gas or liquid phases, at high pressures in the presence of solid or supported acidic catalysts. Both processes require that the isopropyl alcohol be separated from water and other by-products by distillation. Isopropyl alcohol and water form an azeotrope and simple distillation gives a material which is 87.9% by weight isopropyl alcohol and 12.1% by weight water.Pure (anhydrous) isopropyl alcohol is made by azeotropic distillation of the "wet" isopropyl alcohol using either diisopropyl ether or cyclohexane as azeotroping agents.
Post Reply