Time to Relax... See Movies...
Moderator: Production
-
- Posts: 25
- Joined: Mon Jul 07, 2008 8:06 am
- Location: Australia
- Contact:
-
- Posts: 42
- Joined: Sat Feb 03, 2007 9:13 pm
- Location: Islamabad
- Contact:
-
- Posts: 42
- Joined: Sat Feb 03, 2007 9:13 pm
- Location: Islamabad
- Contact:
Hi Asad Idbal Good to see you here
To be a good start in reservoir engineering you should have to gone through these
1.GIIP/OIIP & Reserve calculation by
a)Volumetric
b)Material Balance
2.Well Testing
a)Transient Testing (Build Up, Drawdown etc)
b)Deliverability Tesing (MRT, IT & MIT)
3.Reservoir fluids PVT Analysis
4.Darcy Law & Diffusivity Equation
i think above are enough to have a good start
try to discuss it with some others also may some one can guide you better than me
To be a good start in reservoir engineering you should have to gone through these
1.GIIP/OIIP & Reserve calculation by
a)Volumetric
b)Material Balance
2.Well Testing
a)Transient Testing (Build Up, Drawdown etc)
b)Deliverability Tesing (MRT, IT & MIT)
3.Reservoir fluids PVT Analysis
4.Darcy Law & Diffusivity Equation
i think above are enough to have a good start
try to discuss it with some others also may some one can guide you better than me
-
- Posts: 42
- Joined: Sat Feb 03, 2007 9:13 pm
- Location: Islamabad
- Contact: