(Ask) Initialization step
Moderator: Simulation_team
-
- Posts: 2
- Joined: Thu Sep 17, 2015 3:24 pm
- LinkedIn Profile: https://www.linkedin.com/profile/view?i ... rofile_pic
(Ask) Initialization step
Hi All,
I'm newbie in reservoir modeling. I have a problem with my project. What should i do to synchronize the hydrocarbon volumetric of static modeling and dynamic modeling (initialization step) before forecasting. The difference is still large about 29%.
Thank you so much for the reply
I'm newbie in reservoir modeling. I have a problem with my project. What should i do to synchronize the hydrocarbon volumetric of static modeling and dynamic modeling (initialization step) before forecasting. The difference is still large about 29%.
Thank you so much for the reply
Re: (Ask) Initialization step
Did you check which one is higher, If the static OIP number is higher than the one from Initialization run, this could be due to dropping transition zone from OIP.
If the answer is reverse so check again the porosity saturation population
If the answer is reverse so check again the porosity saturation population