Ecrin Saphir for Well Test Analysis step by step tutorial

Well Test Analysis, Pressure and Production Monitoring........ etc.

Moderator: moderators

User avatar
FANARCO
Administrator
Administrator
Posts: 2063
Joined: Mon Jul 10, 2006 9:56 pm
Contact:

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by FANARCO »

Now four windows inside Saphir for different analysis tools as a default Maximize the Log-Log plot window .

Notice: in normal analysis, the pressure data and derivative curves should identically the same in the early period which is not confirmed in this case (red circle).

Image
User avatar
FANARCO
Administrator
Administrator
Posts: 2063
Joined: Mon Jul 10, 2006 9:56 pm
Contact:

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by FANARCO »

this problem indicating that the last Pwf is not correctly assigned. i.e. in many cases the Shut in from well head doesn't prevent well to flow at sand face.

Even if your well head is closed, still some flow downhole.

In order to rectify this issue just change the Pwf manually,

Double click on the Log-Log plot window / Set / P@dt=0

Try to modify the value for Pwf to reach the correct one.

Finally it is 1112 Psi

Click Ok

You will see the issue resolved on the chart

Image
User avatar
FANARCO
Administrator
Administrator
Posts: 2063
Joined: Mon Jul 10, 2006 9:56 pm
Contact:

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by FANARCO »

Click the Model Icon in the left pane under Interpretation tab,

Try to change the model and its parameters and see the results.

By trial and error you will get a good match.

We will work together to get the best match but try from your side...

Image
KhuwajaShoaib
Posts: 5
Joined: Thu Dec 25, 2014 11:50 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by KhuwajaShoaib »

Hey seniors, i am using Ecrin v4.10 cracked version for well test analysis but unfortunately this software didn't work properly (didn't opens a new project/file) on my system(win 8.1). i have reinstalled several times but didn't work properly, if any one of u have a solution plz tell...
User avatar
mrgmm
Senior member
Posts: 156
Joined: Sun Jul 30, 2006 4:15 am

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by mrgmm »

KhuwajaShoaib wrote:Hey seniors, i am using Ecrin v4.10 cracked version for well test analysis but unfortunately this software didn't work properly (didn't opens a new project/file) on my system(win 8.1). i have reinstalled several times but didn't work properly, if any one of u have a solution plz tell...
please check your PM..
VactesisDestorm
Posts: 2
Joined: Sun Oct 06, 2013 7:54 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by VactesisDestorm »

mrgmm,

what version you have?
User avatar
mrgmm
Senior member
Posts: 156
Joined: Sun Jul 30, 2006 4:15 am

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by mrgmm »

VactesisDestorm wrote:mrgmm,

what version you have?

4.0.2
Asad_baloch
Posts: 4
Joined: Fri Oct 04, 2013 11:08 am
Location: Stavanger

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by Asad_baloch »

Dear Brother Fanarco do you have the medicine for ecrin 4.3?
User avatar
FANARCO
Administrator
Administrator
Posts: 2063
Joined: Mon Jul 10, 2006 9:56 pm
Contact:

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by FANARCO »

Asad_baloch wrote:Dear Brother Fanarco do you have the medicine for ecrin 4.3?
Sorry Asad,

Don have it.
jdmorales
Posts: 7
Joined: Thu Mar 13, 2014 11:49 pm
Location: Colombia

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by jdmorales »

Hello FANARCO,
The best match I had by quick analysis:
Channel or parallel faults model (1/2 slope)
low wellbore storage C ~1x10^-10
skin ~ -5
k = 0.5 mD.
No matter which distance I choose for the faults, the model remain the same.

Could you please elaborate more on this topic and continue your tutorial?
Thanks a lot.
User avatar
FANARCO
Administrator
Administrator
Posts: 2063
Joined: Mon Jul 10, 2006 9:56 pm
Contact:

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by FANARCO »

jdmorales wrote:Hello FANARCO,
The best match I had by quick analysis:
Channel or parallel faults model (1/2 slope)
low wellbore storage C ~1x10^-10
skin ~ -5
k = 0.5 mD.
No matter which distance I choose for the faults, the model remain the same.

Could you please elaborate more on this topic and continue your tutorial?
Thanks a lot.
Dear jdmorales,

The aim of this thread is to provide you with the detailed steps on how to use Ecrin software and how to handle the data.

Actually, there are a lot of models can be matched here, if you have any other data we can exercise it.

what do u think
muhanad1992
Posts: 38
Joined: Sun Oct 23, 2016 2:22 pm
LinkedIn Profile: muhanned makki

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by muhanad1992 »

analysis.PNG
analysis 2.PNG
anlysis 3.PNG
Good morning

first of all

i entered PVT data like what you did but i got different results i don't know why and i tried many time but i didn't get same your results please see Pic below
PVT data.PNG
Second of all
I did these three interpretation with different results the first one with different well model and same boundary model

second and third same well model and boundary model but with different value in K & S

my small experience told me the second one is the most best one

but i need your feedback about all these interpretation

Thanks
You do not have the required permissions to view the files attached to this post.
User avatar
FANARCO
Administrator
Administrator
Posts: 2063
Joined: Mon Jul 10, 2006 9:56 pm
Contact:

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by FANARCO »

For PVT, if you entered the same input parameters with the same correlations you should get the same results.
For interpretation you have to adjust the point Pwf @ time 0
Try and error
muhanad1992
Posts: 38
Joined: Sun Oct 23, 2016 2:22 pm
LinkedIn Profile: muhanned makki

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by muhanad1992 »

Good points thank you but i tried many time with PVT like your steps and Sw but i didin't get So=0.49 due to high GOR I already input it! can you help me about this point?.

but you didn't give me your opinion about the Reservoir and boundary models and which one is more accepted
User avatar
FANARCO
Administrator
Administrator
Posts: 2063
Joined: Mon Jul 10, 2006 9:56 pm
Contact:

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Post by FANARCO »

I didn't get your point, what is the relation between PVT and Sw, So....
Post Reply