reservoir simulation

All Reservoir Simulation aspects

Moderator: Simulation_team

Post Reply
Wakil Bunu
Posts: 12
Joined: Thu Mar 27, 2014 5:08 am

reservoir simulation

Post by Wakil Bunu »

Hi guys,

am presently thinking of doing my thesis on reservoir simulation, i want to start looking for data cos it normally takes time before one gets them.

I want to knw what kind of data am i suppose to request for from these companies?

Thanks a lot
User avatar
adrian
Senior member
Posts: 136
Joined: Wed Jun 30, 2010 8:50 pm

Post by adrian »

Since you are an RE so the required data should be:

- Fluid data; PVT report for the subjected reservoirs. CVD and CMD...
- Conventional core analysis.
- Relative permeability curves.
- Capillary pressure curves.
- Openhole and/or interpreted logs.
- Historical Reservoir Pressure data for each reservoir on the same datum.
- Build up/draw down analysis (will help you to identify the reservoir type, Skin, permeability, and PI).
- Well data; Wellbore sketch, well deviation surveys. perforation and workover history.
- Historical Production data; Oil, Gas and Water (and injection if any). These data shoulc be allocated for each reserv
- Regional aquifer description; aquifer size, strength, permeability.
- Any regional data from the nearby fields like Recovery factor.....etc
Wakil Bunu
Posts: 12
Joined: Thu Mar 27, 2014 5:08 am

Post by Wakil Bunu »

Thanks a lot.
Post Reply