.::FANARCO::. • Ecrin Saphir for Well Test Analysis step by step tutorial

Ecrin Saphir for Well Test Analysis step by step tutorial

Well Test Analysis, Pressure and Production Monitoring........ etc.

Moderator: moderators

Ecrin Saphir for Well Test Analysis step by step tutorial

Postby FANARCO » Fri Feb 27, 2015 12:17 pm

Here we will start working on real data for well test analysis using Saphir software;

The candidate well for interpretation is A10. It is an offshore oil well with high Gas Oil Ratio GOR.

The formation is Sandstone (Heterogeneous) and the permeability ranges from 0.5 to 3555 md.

Below is the well, reservoir and test information:


well : A10
===============

Guage depth = 2098.7 M.S.S
Datum depth = 2100 mss
reservoir : 2126.5 - 2171.5 mss
perfs. : 2128.4 - 2141.7 mss
OWC @ 2165 mss
por. = 16.7 % Sw = 41 % Vsh = 10 %
Production time = 20000 hrs with the average :
Qo = 350 Stb/d
Qw = 6.5 b/d
Qg = 4.6 mmscf/d
===============================================
test conditions
drawdown period : Qo = 390 STB/D
Qg = 5.7 mmscf/d
W.C. = 2.15 %
oil FVF = 1.45 bbl/stb
r well = 0.4 ft
==============================================
PVT
sp. gr. of gas = 0.754 , oil = 0.856
N2 = 0.182 % CO2 = 0.239 %
Pb = 3377 psi


Please find the raw data in attachment






..
You do not have the required permissions to view the files attached to this post.
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Fri Feb 27, 2015 12:43 pm

Extract the attachment in the first post and open Saphir.

File, New

The following window will appear choose the Reference phase Oil and include the other information as below and click Next


Image
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Fri Feb 27, 2015 2:36 pm

A new window will be displayed,

Put the reservoir Temp. and Press. as below screen.

Usually if the memory gauge depth is closed to the perforated interval we can use the same temperature data obtained by memory gauge otherwise should be corrected to the perforation depth.

In this case we considered the reservoir temperature as the maximum value in the memory gauge file and the reservoir pressure the same idea.

The Gas Oil Ratio calculated from the test data in the first post.

Skip the water properties in blue icon and click on Gas properties in the same window


Image
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Fri Feb 27, 2015 2:41 pm

In the Gas properties tab insert the values as below shot (same values as in the first post) then click on Oil properties icon (Green one)

Image


Continue....
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Fri Feb 27, 2015 2:45 pm

In the Oil properties tab choose sp. gr from the drop down menu and put 0.856 to be matched with the data in the first post.

Click Next


Image
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Fri Feb 27, 2015 4:01 pm

A new window will appear as a PVT parameters confirmation which calculated based on your input previously.

If the calculated parameters doesnt match the lab data you can go back to the previous Oil and gas properties screens and choose another correlations.

For instance these value is closed to the lab measurment so will accept.

For saturations values please change it to be as below screenshot.

Click Create



Image
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Mon Mar 02, 2015 3:52 pm

Now the project had been created and need to load the pressure and production data for interpretation.

Click on Load P icon (Load pressure data), a new window will be displayed.


Image
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Mon Mar 02, 2015 3:59 pm

Choose the "File" from Radio button, Choose Ascii file from the drop down menu and Click on "Open" icon.

This will open a new window asking for the data file that you want to work on.

Point to your memory gauge file (assume you already downloaded from the attachment in the first post).

Click ok,

The following window indicating that the file loaded successfully.


Click Next


..

Image






.
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Tue Mar 03, 2015 1:58 pm

A new window will be displayed as below picture

This type of data (in the attached file in the first post) is consists of four column (1- Time HH:MM:SS 2- Decimal Time in hours since start of memory gauge 3- Pressure in Psi 4- Temperature in F)

The data structure may be different from this case and any other case.

So, don't worry if you face with another format.

We will explain later how to convert from a specific format to another.

For instance choose a field radio button from the Line format list.



Image
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Tue Mar 03, 2015 2:44 pm

Now you are free to choose the suitable format for your well test data file; Consider the first row as Undefined by selecting "Undefined" from the drop-down menu under Type column (Row A)

For Row B choose (Decimal time)

Row C choose pressure

Row D choose undefined (since we will not use the temperature in our interpretation).

Now you teached the software Ecrin which data will be used for.

Click (load)

Image
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Tue Mar 03, 2015 2:48 pm

A small window will appear asking about time cycles (the software detects multiple time cycle as each 24 hour).

Choose "Ignore new data" and click "Apply to all"

Image
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Tue Mar 03, 2015 2:53 pm

Now you should see the gauge data loaded and displayed as below:

Save your Saphir file.

Will start loading/Importing production data

Image
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Thu Mar 05, 2015 1:04 pm

Importing production rates (Gas, oil and water) into Ecrin Saphir and differentiate the Draw Down and Build up periods

Click on the "Rates" tab in the left pane of Saphir.

Enter the same values as screen shot below.

This production rates values from the input data in the first post.

If you put all rates to zero it will be identified as a "Shut in" or Build up period.

An accurate entry for this periods is very important for Analysis.

Now every thing already imported in Saphire and it is Analysis time.....




Image
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Thu Mar 05, 2015 1:28 pm

Well Test Interpretation in Saphir

Go to Interpretation tab in the left pane and click on Extract dP

A new window will appear asking you for the period (group) you want to work on.

For instance will use build-up #1 click Ok

Image
User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Re: Ecrin Saphir for Well Test Analysis step by step tutoria

Postby FANARCO » Thu Mar 05, 2015 1:32 pm

.




For a while, leave the default values as it is in the parameters screen below then OK.


Image


User avatar
FANARCO
Administrator
Administrator
 
Posts: 1952
Joined: Mon Jul 10, 2006 9:56 pm

Next

Return to Conventional Reservoir Engineering

Who is online

Users browsing this forum: No registered users and 1 guest

cron