Usage Concentration of Mil-free

Articles, Softwares, ..... etc

Moderator: Drilling

Post Reply
dirra
Posts: 2
Joined: Tue Apr 15, 2008 11:10 pm
Location: Turkey
Contact:

Usage Concentration of Mil-free

Post by dirra »

Hi. I need the usage concentration of milchem mil-free spotting agent for stuck pipe w/ crude oil.
thanks
Robin Davies
Posts: 6
Joined: Wed Feb 21, 2007 3:16 pm

Post by Robin Davies »

Dear Dirra:

Apologies for the delay in replying but I only just noticed your posting.

Wow - This must be quite old stock ---- As you may know Milchem has moved thru Milpark & Inteq to BH Drilling Fluids !! It was packaged in 5 or 55 gall drums.

The recommended treatment / make up of an unweighted soak solution is one - two gallons per barrel of oil that is required to cover the zone of stuck pipe.
Typically with respect to rig pit sizes and the practical handling & mixing of 55 gallon drums one complete drum is added to 50 barrels of oil.

Remember Mil Free is classified as a combustible liquid (UN #1993) for transportation within the USA.

Good Luck if you ever have to use it.....
Best regards,
RAD
Post Reply