Carbon Black—Resin and Film Coloring Agents

Post Reply
momo
Posts: 1
Joined: Tue Jul 12, 2011 5:28 pm

Carbon Black

Post by momo »

Carbon black is a material produced by the incomplete combustion of heavy petroleum products such as FCC tar, coal tar, ethylene cracking tar, and a small amount from vegetable oil. Carbon black is a form of amorphous carbon that has a high surface-area-to-volume ratio, although its surface-area-to-volume ratio is low compared to that of activated carbon. It is dissimilar to soot in its much higher surface-area-to-volume ratio and significantly lower (negligible and non-bioavailable) PAH (polycyclic aromatic hydrocarbon) content. Carbon black is used as a pigment and reinforcement in rubber and plastic products.

Carbon black has high tinting strength and is thermally stable, and therefore it is suitable for coloring resins and films that are heat-formed. Carbon black is also excellent for absorbing ultraviolet light, providing both a superb resistance against ultraviolet rays and a coloring effect when just a small amount is mixed with resins. Carbon black is widely used for general coloring for resins and films. Resins with carbon black are used in automobile bumpers, wire coverings andsteel pipe linings which require weather resistance in particular.
Post Reply