.::FANARCO::.

In Gas Condensate reservoir the surface recombined sample should be more accurate I would agree on that only if you dont have a representative bottom hole sample. If you have uncontaminated MDT sample or if you have bottom hole sample which was collected at higher pressure than dew point why should...

sorry I couldnt understand one point. if you have mdt samples and surface samples, which one would be more accurate?(assuming both were taken in ideal conditions) here are three sources for PVT sampling; You can get it from MDT or Downhole sampling using WireLine/E Line or Surface recombined sample....

from my experience they tend to be naturally fractured. from simulation point of view, compressibility factors are quite low and therefore most of the driving mechanism is rock compresiblity. operationally fracturing operations are very difficult, acid stimulation sometimes works. but you would need...

says password is wrong mate.
could you please check it again?

Because in surface evolved gas results shrinkage... to be less than 1 it should dissolve more gas in standard conditions than reservoir conditions which is physically not possible as Mohammed explained.
hope that answers.

save time and material...

look at Kermit's or Beggs' books production technology books. you will see nodal analysis graphs.
THE TECHNOLOGY OF ARTIFICIAL LIFT METHODS by Kermit Brown
Beggs - Production Optimization Using Nodal Analysis

What is the time format of your production & economics?
normally for costing we use $/bbl, that is freight cost/volume shipped.
you can tell more about your purpose etc...
good luck

why dont you read eclipse manual?_

Hi Fanarco Can you share more information about recombination. what is the GOR or CGR assumed for recombination,also the density of samples? From my experience if you have sampled gas on both samplings it should be gas reservoir. Condensate drop out occurs either at reservoir, bottom hole or at sepa...

link doesnt exist anymore..

Dear Brothers
Can anyone share the k*a*p*p*a p*t*a and p*e*t*e*x I*P*M suite softwares?
thanks in advance